Description
DMA Eplexor® HT Series up to 500 N - For ceramics, metals, alloys, glasses, composites and more
The DMA GABO Eplexor® HT line is the only instrument series on the market which is able to carry out DMA measurements with a maximum dynamic force of 500 N to 1500°C.
Two high-temperature furnaces are available: RT to 1000°C and RT to 1500°C. With a standard furnace (-160°C to 500°C) simultaneously mounted, it is possible to perform consecutive test runs in both the low- and high-temperature range. Eplexor® HT instruments can thus cover the entire temperature span from -160°C to 1500°C.
The electronics within the system automatically identify which furnace is currently in use.
The following DMA GABO Eplexor® HT are available:
DMA GABO Eplexor® 25N HT,
DMA GABO Eplexor® 100N HT,
DMA GABO Eplexor® 150N HT,
DMA GABO Eplexor® 500N HT,
DMA Eplexor® up to 500 N - High-Force DMA
The testing instruments of the DMA GABO Eplexor® series up to ±500 N enable the dynamic mechanical (or static) characterization of a wide range of different materials including elastomers and polymers, composites, metals, glasses, ceramics, biomaterials and foods, adhesives, and liquids.
The modular design of the high-force DMA systems allows for measurements in the tension, compression, bending and shearing modes. The testing machines in this series differ from each other mainly in terms of their maximum dynamic force ranges of ±25 N, ±100 N, ±150 N and ±500 N.
Various add-on options make these testing machines a safe investment for the long-term.
All testing machines in this series are conform to standards such as DIN 53513, ISO 6721/1, ISO 6721/4, ISO 6721/5, ISO 6721/6, ISO 4664, ASTM D4065, and ASTM D4473.
DMA 523 Eplexor® High-Force Series- For Large and High-Modulus Samples
The instruments in our high-force Eplexor® series offer static and additional dynamic force levels from max. ± 2000 N to max. ± 4000 N, and are thus the perfect choice for investigating the dynamic-mechanical (or only static) properties of rigid samples as well as of specimens with larger dimensions – even component parts.
Thanks to their modular design, high-force DMA instruments can accommodate add-ons to additionally carry out tests on such properties as fatigue, heat build-up, blow-out and rolling resistance.
All testing machines in this series are based on standards such as DIN 53513, DIN 53533, ISO 6721/1, ISO 6721/4, ISO 6721/5, ISO 6721/6, ISO 4664, ISO 4666/3, ISO 4666/4, ASTM D623, ASTM D4065, and ASTM D4473.
The following high-force DMA instruments are available:
DMA 523 Eplexor® (2000 N),
DMA 523 Eplexor® (4000N)